Roto-Flex RF-120B
Extended Range Armored Cable Stripper
"Two Tools In One"

The RF-120B Combines the cutting range of the Roto-Split & Roto-Flex in one tool Cut MC & BX from 14-2 to 2-4,  Flex from 3/8" to 3/4" trade size

The RF-120B Combines the cutting range of the Roto-Split & Roto-Flex in one tool Cut MC & BX from 14-2 to 2-4,  Flex from 3/8" to 3/4" trade size

A few turns of the crank of this compact tool produces a clean slit through armored casing. Simply untwist to strip! This operation takes only a few seconds. It is absolutely safe and does not damage the wires inside due to the unique built-in depth of cut stop, no need to finagle with an adjustment screw! The Roto-Flex® spells the end to nicked fingers and cut knees. The open channel construction pioneered by Seatek allows cutting in the middle of a roll. Simplicity at its best!

ADAPTER IN TO CUT 3/4" FLEX

ADAPTER IN TO CUT 3/4" FLEX

ADAPTER IN TO CUT 3/8" FLEX

ADAPTER IN TO CUT 3/8" FLEX

Carry It Anywhere!

This rugged tool can be carried in your belt pouch or in your hip pocket like a pair of pliers. Always ready when you need it, even on top of a ladder or in hard to reach places.

A few turns of the crank makes a clean slit through armored casing. This takes only a few seconds, simply untwist to strip! Cutting is safe & does not damage wires, and the the Roto-Flex also spells the end to nicked fingers & cut knees. The open channel construction pioneered by Seatek allows cutting in the middle of a roll. Simplicity at its best!

Just position any size cable in the channel, squeeze and turn the blade handle...That's it, no thumbscrew adjustments required. Best of all the cable pops out as soon as a cut is completed.

Demonstration of the Roto-Split RS-101 cutting MC cable

  • RF-120B accepts cable from 0.375" to 1.125" diameter and cuts MC sized from 14-2 to 2-4 & 3/8" to 3/4" trade size flex.
  • Swinging adapter automatically reduces the depth of cut when switching from large to small size cable
  • Simple clamping system - only half a turn of the thumb screw to clamp or release the cable - one part does it all!
  • No fuss side loading to cut anywhere along the cable
  • Make cuts in tight quarters! Simply ratchet the handle back & forth when you're in a tight spot.
  • Self-tightening blade system and ergonomic crank handle with offset for maximum hand clearance
  • Blade storage cartridge in knob with storage for 6 blades.
  • Handsome die cast epoxy enameled body. Overall a tool oozing with quality and smart engineering
 
Transient
 

Accessories

Transient

B-102 Blade

Blue Sapphire universal standard replacement blade for all models of the Roto-Split & Roto-Flex

 
Transient

B-107 Blade

Offset teeth prevent clogging when cutting aluminum.  Use on all models of the Roto-Split & Roto-Flex.

101-106-ss.jpg

101-106 Retrofit Kit
for Roto-Split

 
Transient

101-107 Power Conversion Kit
Motorize your Roto Split or Flex!

ls-105-2c-ss.jpg

LS-105 Lubricant Stick

Use on all models of the Roto-Split & Roto-Flex to increase the life of your blades!

 
101-110-2cw2.jpg

Ergonomic Handle

Curved ergonomic handle with blade storage cartridge in knob

SATISFACTION GUARANTEED OR YOUR MONEY BACK!

Guaranty: The ROTO-SPLIT® has a lifetime guaranty against defects. Any parts (except the circular cutter) will be repaired or replaced free; you pay only the one way shipping charge.

RS-101AC Brochure

RS-101AC Brochure

RF-120B Instructions

RF-120B Instructions