Have a Question? Post it Here.
Posted: February 27th, 2007 under Questions.
Comments: 5
Comments
Comment from Earl Grow
Time: April 25, 2007, 9:49 am
I am looking for a amrored cable stripping tool to strip IEC onshore armored cable. It has a PVC jacket and thinn wire armor interior jacket. DIameters 3/8 to 3/4″ approx. Can you help with anything.
Comment from Marc
Time: May 2, 2007, 8:19 am
The Vee-Twin VT-270 might be able to strip this cable as long as the interior jacket is not stainless steel. We also have a new product, the CT-255 Ring-Cut Master which has a diamond abrasive wheel. This tool can cut up to 0.625″ OD, and will cut stainless braiding. You are welcome to send us a sample of this cable and we will test our tools on it.
Comment from Jason Young
Time: May 5, 2007, 12:13 pm
Hi,
I am looking for a wire stripping or cutting tool that can handle at least 10 - 12 AWG, stranded wire. Something that would strip 2 - 14 AWG, stranded wire would be even better. Do you have any suggestions?
Comment from Marc
Time: May 7, 2007, 9:03 am
We have a multipurpose wire stripper and cutter http://www.seatekco.com/mw-s10s.htm
The Vee-Twin VT-270 can strip larger diameter wires, from 5/6″ to 2-1/8″ http://www.seatekco.com/vt-270.htm
If you are looking for a scrap recovery machine go to the links section of our website and scroll down, we have links to machinery there. Hope this helps - Marc
Comment from Dave
Time: May 16, 2007, 2:23 pm
Which model of the MM-175 Mighty Miter will work with the Milwaukee 360° Handle Super Sawzall Orbital Recip Saw (Model 6523-21)?
Write a comment